Gallery · built from text

Impeller Wheel

Impeller Wheel: top, front, right, isometric, section and underside views
TOP · FRONT · RIGHT / ISO · SECTION · UNDERSIDE — rendered from the generated solid, shared scale

Make it yours

Build thisChange it

Build this runs the exact brief below and gives you the STL / OBJ in about a minute. Change it opens the generator with the brief in the box so you can edit a dimension first. Free, no account.

The prompt

Double-inlet impeller wheel, outer diameter 900mm, total width 320mm, with dual inlet eyes of 520mm diameter, 12 blades per side, 5mm blade thickness, centre plate 10mm thick, shrouds 6mm thick; integrated central hub OD 220mm, bore 80mm, length 150mm with a 22x14mm keyway slot, and clamp collars 110mm diameter by 20mm wide on both sides, all fused as one solid part

This is the one-paragraph brief the generator built from: dimensions in millimetres, features named, nothing else. Writing yours the same way is the quickest route to a first-time build — see the prompt contract.

More from the gallery

Pipe Flange: isometric view of the generated model

Pipe Flange

Pipe flange with a 115x115mm square base, 10mm thick base plate, four 5mm mounting holes spaced 100mm apart, a central cylindrical pipe holder with 49mm inner diameter, 70mm height, and exterior triangular reinforcing ribs / pyramid-style support gussets from the base to the cylinder.

Forge (B-rep)QC 10/10
Acoustic Cover: isometric view of the generated model

Acoustic Cover

Rectangular acoustic cover 800x600x400mm with 10mm thick walls, 20mm wide slanted slats on sides for airflow

Forge (B-rep)QC 10/10
Hollow box with M3 pilot holes: isometric view of the generated model

Hollow box with M3 pilot holes

200 mm wide 40 mm deep 40 mm high deep hollow box with closed top and rounded corners. 5 mm corner radius. hollow on bottom. 5 mm wall. m3 pilot holes on all 4 corners. 5 mm recessed lip on bottom.

Forge (B-rep)QC 10/10
Mechanical arm link: isometric view of the generated model

Mechanical arm link

Elongated rectangular link, 173mm long, 38.1mm wide, 10.2mm thick, with rounded ends, two 12.7mm holes 152.4mm apart, and 2mm fillets on external edges.

Forge (B-rep)QC 10/10
Enclosure base with standoffs: isometric view of the generated model

Enclosure base with standoffs

96x68x26mm open-top enclosure with 2.4mm walls, 12.5mm holes in left and right walls, and four 6.5mm standoffs with 2.5mm screw holes on the bottom

Forge (B-rep)QC 10/10
Base plate with slots: isometric view of the generated model

Base plate with slots

Flat plate 130x90x3mm with R5mm corners, 4x Ø3.2mm holes, 2x 3x15mm slots, 1x 10x5mm cable-pass slot with R2.5mm ends

Forge (B-rep)QC 10/10

All models →