Free · no account · STL, STEP, OBJ
Part generators
One page per kind of part, each with a prompt already filled in. Pick the part, change the sizes, and generate. Everything builds in your browser.
Spur gear generator
A 20-tooth spur gear, module 2, 8mm thick, with a 6mm bore
Mounting bracket generator
An L-bracket 50mm x 50mm, 30mm wide, 4mm thick, with two 5mm holes in each leg
Electronics enclosure generator
An enclosure with an inside size of 80mm x 50mm x 30mm, 2mm walls, and four M3 standoffs on a 75mm x 45mm pattern
Threaded bolt and nut generator
An M8 x 50 hex head bolt with a 13mm hex head, 5mm tall
Wall hook generator
A 60mm wall hook, 20mm wide, 6mm thick, with a 25mm arm and two 4mm countersunk screw holes
Washer, spacer and bushing generator
A washer with an 8.4mm hole, 16mm outer diameter, 1.6mm thick
Pipe, hose and duct adapter generator
A hose adapter from 32mm outer diameter to 25mm outer diameter, each end 30mm long, 2mm walls
3D-printable keychain maker
Olivia
Something else?
The generator is not limited to these. Describe any single part with millimetre sizes and it will build it.