Robotic Arm Assembly
- Forge engine (B-rep, STL / OBJ / STEP-ready)
- Automatic QC 9/10
- Published Oct 25, 2026
Make it yours
Build this runs the exact brief below and gives you the STL / OBJ in about a minute. Change it opens the generator with the brief in the box so you can edit a dimension first. Free, no account.
The prompt
A single unified robotic arm assembly on a 200x200mm square base plate, 10mm thick. In the center of the base, a central vertical cylinder of 80mm diameter and 50mm height. Extending from the cylinder is a continuous connected arm structure with a 300mm main section and a 250mm secondary section, all fused as one solid body.
This is the one-paragraph brief the generator built from: dimensions in millimetres, features named, nothing else. Writing yours the same way is the quickest route to a first-time build — see the prompt contract.
More from the gallery
Pipe Flange
Pipe flange with a 115x115mm square base, 10mm thick base plate, four 5mm mounting holes spaced 100mm apart, a central cylindrical pipe holder with 49mm inner diameter, 70mm height, and exterior triangular reinforcing ribs / pyramid-style support gussets from the base to the cylinder.
Acoustic Cover
Rectangular acoustic cover 800x600x400mm with 10mm thick walls, 20mm wide slanted slats on sides for airflow
Hollow box with M3 pilot holes
200 mm wide 40 mm deep 40 mm high deep hollow box with closed top and rounded corners. 5 mm corner radius. hollow on bottom. 5 mm wall. m3 pilot holes on all 4 corners. 5 mm recessed lip on bottom.
Mechanical arm link
Elongated rectangular link, 173mm long, 38.1mm wide, 10.2mm thick, with rounded ends, two 12.7mm holes 152.4mm apart, and 2mm fillets on external edges.
Enclosure base with standoffs
96x68x26mm open-top enclosure with 2.4mm walls, 12.5mm holes in left and right walls, and four 6.5mm standoffs with 2.5mm screw holes on the bottom
Base plate with slots
Flat plate 130x90x3mm with R5mm corners, 4x Ø3.2mm holes, 2x 3x15mm slots, 1x 10x5mm cable-pass slot with R2.5mm ends